90726 06/19
Copyright 2013-2019, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
4
DG1 Key Cuts
Degree Key System Technical Manual
90 TYP. (.307) .054.001 .2440.0025 .170.001TYP. 1 2 3 4 5 6 REFERENCE LINE BOTTOM OF KEY .271.0015 (1) .241.0015 (2) .211.0015 (3) .181.0015 (4) .151.0015 (5) .121.002 (6) .301+-.0015 (0)
DG1 cuts from Bow to Tip MACF=4
Bottom Pins (BP) for DG1- cylinders Size # Part No. Length
0 DG-0027 .201 1 DG-0021 .231 2 DG-0022 .261 3 DG-0023 .291 4 DG-0024 .321 5 DG-0025 .351 6 DG-0026 .381
Driver Pins (DP) All Degree 6300 cores Driver Pins (DP) for Bump Resistance (DG1 Fixed Core Cylinder Only)* Driver Pins (DP) For all Degree Standard Cylinders Size # Part No. Length
1 DG-0051 .030 2 DG-0052 .060 3 DG-0053 .090 4 DG-0054 .120 5 DG-0045 .150 6 DG-0246 .180 7 DG-0247 .210 8 DG-0248 .240 9 DG-0249 .270 10 DG-0250 .300
Size # Part No. Length
4 DG-0036 .120 5 DG-0035 .150 6 DG-0034 .180 7 DG-0033 .210 8 DG-0032 .240 9 DG-0031 .270 10 DG-0037 .300
Size # Part No. Length
1 DG-0051 .030 2 DG-0052 .060 3 DG-0053 .090 4 DG-0054 .120 5 DG-0045 .150 6 DG-0044 .180 7 DG-0043 .210 8 DG-0042 .240 9 DG-0041 .270 10 DG-0250 .300
Master Wafers (MW) for all DG- series Control Drivers (CD) for all DG- 6300 Large Format Interchangeable Cores (3 & 4 Chambers) Size # Part No. Length
1 DG-0051 .030 2 DG-0052 .060 3 DG-0053 .090 4 DG-0054 .120 5 DG-0055 .150 6 DG-0246 .180
Size # Part No. Length
1 DG-0051 .030 2 DG-0052 .060 3 DG-0053 .090 4 DG-0054 .120 5 DG-0045 .150 6 n/a 7 DG-0247 .210 8 DG-0248 .240 9 DG-0249 .270 10 DG-0250 .300 11 DG-0251 .330 12 DG-0252 .360
*Not to be used with 6300 series Large Format Interchangeable Cores
1-800-727-5477 www.sargentlock.com
Pin diamaters 0.135
Previous Page