Supported Options
n
Passport 1000, P1 - Power over Ethernet
n
Passport 1000, P2 - WiFi Enabled
n
IN Series, IN120 - WiFi Enabled
n
IN Series, IN220 - Power over Ethernet
Features
n
2,400/10,000 users per lock*
n
10,000 event transaction history/audit trail
n
Provides complete coverage of door prep for Von Duprin 996 trim; call 800-810-WIRE for information on door prep coverage for other trims
n
Key override compatible with a variety of rim cylinders
n
Available in WiFi and PoE
n
HID multiCLASS SE technology - Supports high coercivity magstripe (Passport 1000 only) - Supports HID 125 kHz prox or 13.56 MHz iCLASS contactless credentials (full authentication, all formats) - Supports CSN reads for other common 13.56 MHz cards, including MIFARE , MIFARE DESFire , and Felica - Available with keypad
n
Real-time door status monitoring
n
Weatherseal gasket and conduit included for use on exterior doors. Shroud available.
n
Available with MicroShield antimicrobial finish
* Contact your access control system manufacturer for more information
Benefits
n
Intelligence built into the lock for local decision making
n
Utilizes network infrastructure for cost-effective installations; no proprietary equipment required
n
Offers an easy, cost-effective solution for adding IP-enabled access control to existing exit devices
n
HID multiCLASS SE technology provides simultaneous support for multiple credentials, offering an easy migration path to higher security credentials and mobile access.
Credential Support
n
Mag Strip available on Passport 1000 lines only
n
High Frequency (13.56 MHz): - Secure Identity Object (SIO) on Mobile IDs (Bluetooth Smart)
n
13.56 MHz credentials: - iCLASS - iCLASS SE (SIO-enabled) - iCLASS Seos - SIO on MIFARE Classic - SIO on MIFARE DESFire EV1 - MIFARE Classic - MIFARE DESFire EV1 - NFC-enabled mobile phones
n
125 kHz credentials: - HID Prox
Specifications
n
Meets ANSI/BHMA Grade 1 requirements
n
UL/ULC Listed for fire doors*
n
Requires Von Duprin RX switch assembly #050251-00 (supplied by others)
Software
Compatible with approved third party access control software.
A truly graceful exit.
Add the advanced access control capabilities of ASSA ABLOY's leading IP-enabled solutions to existing Von Duprin 98/99 Series rim exit devices. Available for IN Series and Passport 1000 locks, our retrofit kits make it easy to upgrade your building security without the hassle and expense of replacing the entire exit device. Utilizing Power over Ethernet (PoE) or WiFi technology, our IP-enabled locks take advantage of existing network infrastructure to provide advanced security and easier, more cost-effective installations.
90865 10/17
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Retrofit Kits for Von Duprin 98/99 Series Rim Exit Device
SARGENT Manufacturing Company 800-727-5477 www.sargentlock.com
Copyright 2015, 2017 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents HID, iCLASS, and multiCLASS SE are registered trademarks or trademarks of HID Global in the U.S. and/or other countries. The Genuine HID Technology logo is a trademark owned and licensed by HID Global. Von Duprin is a registered trademark of Von Duprin LLC.
Previous Page