The Arrow 7800 & 7900 Series Powered Door Operators are low-energy operators which function as standard spring-force closers during close cycles when a door is opened manually, or if power is lost or turned off. The 7800 is a hard wired door operator ideal for doctors' offices, retirement facilities, schools, churches, and other applications where noise may be a concern. The 7900 Series builds off the platform of the 7800 but is supplied with a plug-in power cord. Features:
Non-handed Push or pull side mounting Operates as mechanical surface close during close cycles, when door is opened manually or if power is off Spring force provides the feel of a manual door closer Door can be opened manually if desired Adjustable spring power Backcheck valve Sweep valve & latch valve Unit activation options: - Wall switches - Radio frequency device End-user on/off switch Adjustable door sensitivity Onboard power supply for accessories: 24VDC (1.1A) 2 year limited warranty
Functions:
Adjustable Hold Open - Amount of time a door will stay in the full open position after an activation Obstruction Detection - Motor stops if door is obstructed during opening; door closes On/Off Switch - Disables operator activation Open Delay - Delays operator opening for locking hardware Overload Safety Shut-Off - After 2 minutes of receiving a door activation signal, inverter times out and door closes - Prevents motor/inverter damage
Electrical Data:
Power input; 120 VAC, 60Hz Relay output: SPDT - Normally open/normally closed (jumper) - For electric strike function
Finishes:
Aluminum (689), Specify AL Dark Bronze (690), Specify DB The 7900 series is an extension of the 7800 series but offers the convenience of a plug-in power cord, in lieu of the hard wire power input requirement for the 7800 series. The 7900 series, once installed, simply plugs into a code compliant 120 VAC power receptacle. The power cord is only available on the 7900 Series products and cannot be added to 7800 Series operators. The offering is the same as our current non-power cord version (7800 Series) except that the part numbers begin with 79xx instead of 78xx.
Compliance:
ANSI/BHMA A156.19 certified Meets ANSI/BHMA A156.4 requirements UL / cUL listed for use on fire rated doors UL10C listed for positive pressure fire test Manufactured in an ISO 9001 and ISO 14001 certified facility Complies with requirements for the Americans with Disabilities Act (A.D.A) UL certified environmental product declaration
Look for the universal symbol next to Arrow products that comply with ADA accessibility requirements.
7800 & 7900 Powered Door Operators
Premier Product
Next Page